Screw oil press Z390 - continuous operation, designed for use both as a deep oil extraction press and as a prepress for processing sunflower seeds, rapeseed, sesame, peanuts, soybeans, cotton, and other oil-bearing crops.
Meets international requirements for machines of this class.
| Model | Capacity, tons/24 hours | Residual Oil in Cake %, on Rapeseed* | Residual Oil in Cake %, on Sunflower* | Electric Motor | Main Shaft RPM | Dimensions, mm | Weight, kg |
|---|---|---|---|---|---|---|---|
| Z390 with auxiliary kettle (prepress) | 250~300 | 16-18% | 16-20% | Y315M-4-160kw/ + 5.5kw | 4228x1480x4150 | 13400 | |
| Z390(A) with auxiliary kettle (expeller) | 120~140 | 8% | 7-9% | Y315L-6-132kw/+5.5kw | 26 | 4228x1480x4150 | 13400 |
Note: oil press model Z390 is used as a prepress.
Oil press model Z390(A) is used as an expeller (in lines that do not provide for further cake extraction)
| Specification | Dimensions, mm | Weight, kg | Motor Power, kw | Agitator Speed | Steam Pressure | Steam Consumption | |
|---|---|---|---|---|---|---|---|
| Auxiliary kettle for Z390, Z390A | Φ1500x650mm | 1818x1818x1750 | 800 | 5 | 42rpm | 0.6Mpa | 100kg/hour |
* The above parameters are achieved with standard preparation of raw materials for pressing For example for rapeseed with deep oil extraction (residual oil in cake - 8%) the parameters of raw materials (steamed rapeseed or sunflower meal from hulled seeds) should have the following characteristics: